Journal - Conference

331. Gia Thị Định, Trần Mạnh Tuấn, Trần Quế Sơn, Direct mras with safe constraints applied for two-wheeled mobile robot, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2174, 2014

332. Lê Tiên Phong, Ngô Đức Minh, Research on designing an energy management system for isolated pv source, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2175, 2014

333. Lê Tiên Phong, Nguyễn Thị Mai Hương, Nguyễn Tiến Hưng, Control of grid-connected solar power systems with interleaved flyback converters, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2176, 2014

334. Nguyễn Hoài Nam, Trịnh Thị Minh Nguyệt, A new training procedure for a class of recurrent neural networks, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2177, 2014

335. Nguyễn Thị Hồng Cẩm, Nguyễn Văn Trang, Vũ Ngọc Pi, A new study on optimum calculation of partial transmission ratios of coupled planetary gear sets, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2178, 2014

336. Nguyễn Thị Thu Thủy, Establishment of a database of emission factors for atmospheric pollutants from steel rolling, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2179, 2014

337. Nguyễn Tiến Duy, Lâm Hoàng Bình, Lâm Hùng Sơn, Nguyễn Phương Huy, Dissolved Oxygen Control of the Activated Sludge Wastewater Treatment Process Using Hedge AlgebraicControl, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2180, 2014

338. Phạm Thị Minh Khuyên, Phạm Thị Mai Yến, Supply chain management for colleges/universities: solutions to improve the efficiency of science and technology transfer, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2181, 2014

339. Nguyễn Đức Thịnh, Phan Thị Phương Thảo, Nguyễn Thị Lâm Oanh, Design and fabrication of robotic bluetooth cleaner, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2182, 2014

340. Nguyễn Đức Thịnh, Vũ Anh Tuấn Nguyễn Văn Dự, Caculation analysis and design for construction of solar engine model, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2183, 2014

341. Phan Thị Thu Hà, Phan Thị Phương Thảo, Effect of annealing treatment on high strain rate behavior of Graphene reinforced Polyurethane composites, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2184, 2014

342. Trương Thị Hồng Thúy, Đỗ Thị Hồng Nga, Application of neural networks for diagnosis of hepatitis, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2185, 2014

343. Vũ Ngọc Huy, Trần Mạnh Tuấn, Nguyen Thị Mai Hương, Nguyễn Tiến Hưng, Robust control of dc motors, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2186, 2014

344. Vũ Ngọc Huy, Trần Mạnh Tuấn, Nguyen Thị Mai Hương, Nguyễn Tiến Hưng, Thyristor-based digital control of dc motors, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2187, 2014

345. Vũ Ngọc Kiên, Đào Huy Du, Nguyễn Hữu Công, Research to improve the model order reduction algorithm, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2188, 2014

346. Vũ Quốc Việt, Improving the efficiency of conventional drinking-water-treatment processes in the removal of arsenic, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2189, 2014

347. Đặng Vũ Xuân Huyên (1,*) , Đặng Vũ Bích Hạnh (1), Nguyễn Phước Dân (1), Assessment of treated latex wastewater reuse for perennial tree irrigation on ground water quality, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2190, 2014

348. Đặng Vũ Xuân Huyên(1*), Trịnh Thị Bích Huyền(1), Đặng Vũ Bích Hạnh (1), Nguyễn Phước Dân (1), Studying on toxicity of treated latex wastewater to plant perennial tree – a case study in Binh Duong, VietNam, Journal of Science and Technology, Vol.127, No.13; ISSN 1859 - 2191, 2014

349. Lê Thị Quỳnh Trang, Nguyên tắc tích hợp giáo dục hướng nghiệp cho học sinh trung học phổ thông trong dạy học môn Công nghệ"., Hội nghị chuyên đề quốc tế - Đại học Sư phạm Hà Nội. Tháng 3 năm, 2014

350. Chunhui Chung, Le Van Nhat, Modeling and Simulation of the Fixed Diamond Wire Sliced Wafer Surface",, ICOMM, 2014

351. Nguyen Minh Y, Pham Ngoc Thang, Nguyen Huy Toan, Demand response on pumping system of commercial buildings under real-time pricing,” ., 1st E-conference on Energies, March, 2014

352. NguyenDuyCuong, Design of MRAS-Based Adaptive Controllers for Motion Systems Using Linear Motors”,, The IEEE International Conference on Information Science, Electronics and Electrical Engineering (ISEEE), ISBN: 978-1-4799-3196-5, Apr-, 2014

353. Nguyen Duy Cuong, Tran Xuan Minh;, Design of Analog MRAS Controllers Using Operational Amplifiers for Motion Control Systems;, International Conference on Information Science, Electronics and Electrical Engineering (ISEEE , Sapporo City, Hokkaido, Japan, April; page 904-908, 2014

354. Pham Huong Quynh, Nguyen Thi Son, A study on nitrogen and phosphorus treatnment process for livestock wastewater to meet nationnal discharge standards, International Forum on Green Technology and Management Environmental protection toward sustainable development, Can Tho University, Can Tho city, September 26,, 2014

355. Tran Xuan Minh, Nguyen Duy Cuong, Learning Feed - forward control for a two - link rigid robot arm,, Conference Program, August 8-10, Singapore, 2014

356. Nguyen Duy Cuong, Tran Xuan Minh, MRAS based LFFC for two link rigid robot arm,, Conference Program, August 8-10, Singapore, 2014

357. Nguyen Duy Cuong, Gia Thi Dinh, Tran Xuan Minh, Direct MRAS based an Adaptive control system for a two wheel mobile robot,, Conference Program, August 8-10, Singapore, 2014

358. Lại Khắc Lãi ; Nguyễn Thị Mai Hương, Mai Trung Thái, Nguyễn Hữu Chinh, Trần Thiện Dũng, Model Predictive Control for Twin Rotor MIMO system (TRMS), Số 9 (82), Tạp chí Khoa học Công nghệ, Đại học Đà Nẵng, 2014

359. L.D.Viet, N.B.Nghi, N.N. Hieu, D.T.Hung, N.N.Linh and L.X.Hung, On a combination of ground-hook controllers for semi-active tuned mass dampers, Journal of Mechanical Science and Technology 28(6), pp 2059-2064., 2014

360. Nguyen Tien Khiem, Duong The Hung, Vu Thi An Ninh, Multiple crack identification in stepped beam by measurements of nature frequencies,, VietNam Journal of Mechanics, số 2, 2014

Trang 12/42 <12...8910111213141516...4142>